Industrial Ceiling Fan

Be the first to review this product

Quick Overview

Industrial ceiling fans rotate at higher speeds than most household ceiling fans. Their blades are also thinner and made of metal rather than wood. Severe injury can result if any part of the body comes in contact with the rotating blades. Regency industrial ceiling fans are not recommended for use in household applications. Can be connected to 120 volts only.

Cooling
Create a cooling breeze of air close to the floor area where most work is done. Hang the fans on long downrods, but at least 7-8 feet off the floor. Special applications may require even greater clearances. Circulate air without pulling hot air down from the ceiling. Since fans do not actually cool the air they move, use more fans per square foot area than the chart recommends.

Heat Reclamation
Best use is to reclaim heat trapped at the ceiling, often 20-40 feet above the floor where temperatures can vary as much as 20 degrees. Hang fans high, but at least 36" down from the ceiling to force warm air down into the working area.
Effective area served by each fan installed for various ceiling heights:
Ceiling Height Effective Sq. Ft.
20 ft. 3500
30 ft. 2800
40 ft. 1700
FC1AW-G FC1AW-G* - White / Almond
3-speed, fan control, 2-wire.
*Includes white and almond knobs.
Light Kit Adaptable FCS-2 - White
FCSA-2 - Almond
FCSI-2 - Ivory
4-speed sliding, fan control, 2-wire, 1.5 amp.

Performance and Energy Information
Fan SpeedAirflow (CFM)Power Use (Watts)Airflow Efficiency (CFM/Watts)
High7820.374.00105.7



IND-WH, White Industrial ceiling fan with three White 56" Metal blades

Double click on above image to view full picture

Zoom Out
Zoom In

Other Finishes

  • IND-WH, White Industrial ceiling fan with three White 56" Metal blades
  • IND-MB, Matte Black Industrial ceiling fan with three Matte Black 56" metal blades
  • IND-ORB, Oil Rubbed Bronze Industrial ceiling fan with thee Oil Rubbed Bronze 56" metal blades

Additional Information

Blade Type 56" Blade Span (3 Metal Blades with Trailing Edge Turned Down)
Motor 188 x 15mm high torque motor
Speed Single speed/300 RPM free run
Downrod 24" downrod included
Box Weight (lbs) 17
Additional Uses Industrial Downrods: I12-FINISH, I36-FINISH, I72-FINISH
Note Current draw .75 AMPS. Lead wires 6 foot. UL listed.